Measure / plan / build

Square footage calculator

Measure the area. Separate the allowance.

Enter decimal feet: 10 feet 6 inches = 10.5 feet. Split irregular shapes into non-overlapping rectangles.

Net measured area
120 ft²
Gross area120 ft²
Openings-0 ft²
With allowance132 ft²
Estimated cost$0
Net square meters11.148 m²
Net square yards13.333 yd²
SectionTreatmentArea (ft²)
1Add120

Do not count overlapping areas twice. An area estimate does not prove that individual cut pieces fit on a sheet.

Cost excludes tax, labor and delivery. Packaging, seams, grain direction and cutting waste can change purchase quantities.

How to calculate square footage

Multiply length by width for each rectangular area, then add the sections. Subtract openings only when they are outside the material area you need. Divide an L-shaped room into two non-overlapping rectangles.

A 12 by 10-foot example

12 × 10 = 120 square feet. A 10% allowance gives 132 square feet. At $3 per square foot the material estimate is $396, before taxes, labor or delivery. An allowance is separate from the measured room size.

Convert feet and inches correctly

10 feet 6 inches is 10 + 6/12 = 10.5 feet, not 10.6. Divide square feet by 9 for square yards, or multiply by 0.09290304 for square meters. Results include both conversions.

Does enough area mean the pieces fit?

No. Part dimensions, grain and kerf matter. Verify parts in the cut-list optimizer. For lumber volume use the board-foot calculator. Plan interior trim with the board-and-batten calculator.