Start with the finished size. Get the parts and sheet layout.
These generators calculate the project parts before placing them on plywood, melamine, or panel stock. Every result can be shared, printed, downloaded, or embedded on another site.
Choose the project you are actually building.
Change the sample dimensions, verify the construction assumptions, and download the result before purchasing material.
Base Cabinet Cut List Calculator
Turn an outside base-cabinet size into a plywood parts list and kerf-aware sheet layout with adjustable material thickness and shelf count.
Open calculator →02 · Opening-to-parts calculatorDrawer Box Cut List Calculator
Convert a cabinet opening into drawer-box sides, fronts, backs, and bottoms with adjustable slide clearance, rear clearance, material thickness, and quantity.
Open calculator →03 · Plywood and melamine plannerCloset Shelving Cut List Calculator
Generate a closet shelving cut list from the overall width, height, depth, bay count, material thickness, and adjustable shelves per bay.
Open calculator →04 · Shaker door parts calculatorCabinet Door Cut List Calculator
Calculate single or paired overlay cabinet-door sizes and generate Shaker rail, stile, and center-panel dimensions from a measured opening.
Open calculator →05 · Adjustable plywood bookcaseBookshelf Cut List Calculator
Generate a bookshelf plywood cut list and sheet layout from the finished width, height, depth, material thickness, and shelf count.
Open calculator →06 · Shop project generatorPlywood Workbench Cut List Calculator
Generate an adjustable plywood workbench cut list with a doubled top, lower shelf, legs, and rails, then lay every panel onto 4×8 sheets.
Open calculator →Generate the parts. Then optimize the stock.
Project calculators answer what to cut. SawNest then applies the same kerf-aware placement engine used by the flagship optimizer to estimate whole sheets, part yield, and stock cost.
Open the general optimizer →