SawNest field guide · 6 min

OpenCutList CSV to SawNest: Check Delimiters, Units & Quantities

Prepare a SketchUp OpenCutList parts table for SawNest. Compare a synthetic semicolon/unit-suffix example with tested normalized CSV and verify every imported row.

OpenCutList derives part information from a SketchUp model and also offers its own cutting diagrams. This guide is for people who want to continue with a reviewed parts table inside SawNest. It is a checked CSV handoff, not a native SketchUp import or a claim that every OpenCutList export works unchanged.

01

Start with the vendor export settings

OpenCutList documents CSV export with configurable columns and comma, semicolon or tab separators. Exported dimensions can retain unit symbols when they are displayed, and only visible material groups are exported. Check the official OpenCutList CSV export documentation for your installed version.

Before exporting, confirm the model components, material assignments, dimensions and counts. Make the intended material groups visible. An omitted group cannot be recovered by the SawNest importer. This guide is independent of OpenCutList and SketchUp and does not imply endorsement.

Choose the export level deliberately. The official documentation distinguishes List of Instances, which exports each part on its own row, from Parts List and Summary, which export what is represented on screen. Use a parts-level table, not a material summary, and check whether repeated components are grouped with a count. For two identical shelves, use one row with quantity 2, or two instance rows with quantity 1 each, never two rows with quantity 2.

02

Compare the practice files

Download the OpenCutList-style practice table and the normalized SawNest CSV. The first is an original synthetic table constructed to demonstrate semicolons and unit suffixes. It is not an export captured from an installed OpenCutList version.

Both represent two shelves at 600 × 280 × 18 mm and one divider at 400 × 280 × 18 mm. The normalized CSV uses Label, Material, Thickness, Width, Length and Quantity. These dimensions are a practice fixture, not a furniture design.

Practice data: normalize formatting without changing physical dimensions
FieldSource exampleReviewed CSV value
Length600 mm600, with millimeters selected
Width280 mm280
Thickness18 mm18
Count / Quantity22, not two duplicate rows
SeparatorSemicolonComma-separated CSV
03

Normalize the table without changing the measurements

Open the exported table in a spreadsheet using its actual separator. If the entire line appears in one cell, fix delimiter handling first. Keep a copy of the untouched export. Select the columns you intend to use and give them clear headers.

Normalize all dimensions to one unit, then put numeric values without unit suffixes in Width, Length and Thickness. In the practice example, 600 mm becomes numeric 600 and the selected import unit remains millimeters. This removes formatting, not physical length. Do not merely remove inch and millimeter symbols from a mixed-unit file.

Save as UTF-8 comma-separated CSV or a values-only XLSX file. Regional spreadsheet settings may save semicolon-separated CSV even when the filename ends in .csv; inspect the actual separator. Do not blindly replace decimal commas, quoted punctuation or every semicolon in arbitrary data.

04

Map and check three pieces before accepting

Open the cut-list importer, choose the normalized fixture and select millimeters. Confirm the header mapping, especially Width vs Length and Quantity. The tested result is two cutting rows, three pieces and one 18 mm plywood group.

If the preview has one giant column, dimension errors or missing rows, stop rather than forcing the import. SawNest does not read .skp files, infer units from a material name or repair an incorrect model. The example does not test every configurable vendor column or localized export.

05

Separate model information from stock settings

Check whether the source dimensions already incorporate machining allowances or edge treatments. Do not apply a second deduction automatically. Preserve any source notes separately and compare the result with the model before cutting.

Confirm stock dimensions, thickness, grain, rotation, kerf and trim inside the planner. Imported Width and Length do not prove grain direction. A valid table is not proof of a buildable assembly or safe cutting sequence.

06

If you need a different starting point

Use the Excel cut-list template for a manually reviewed spreadsheet. For a PDF rather than a SketchUp parts table, follow the PDF-to-cut-list workflow. Keep each original source with its reviewed list.

Apply it to your dimensions

Review the example, then use your measured inputs.

Open the CSV importer →