SawNest field guide · 6 min

Import a Crate Pro Cut List into SawNest: Worked Example

Review a Crate Pro Pieces report in SawNest with a synthetic CSV. Check the profile, units, QtyTot, hardware exclusions and stock before planning cuts.

Use this walkthrough to review a Crate Pro Pieces-style report before planning plywood and lumber in SawNest. Every value in the downloadable example is invented. It is not a customer file, a crate design or a construction plan. SawNest is an independent tool; this guide does not imply Crate Pro endorsement.

01

Start with the synthetic Pieces report

Download the synthetic Crate Pro example CSV, then open the cut-list importer and choose that file. The example uses millimeters, one header row and four data rows. It follows the 31-column Pieces layout supported by the importer.

For your own work, export the parts table as UTF-8 CSV or a values-only .xlsx file. Export commands can differ by Crate Pro version; use its documentation for your version. Keep your original report. SawNest does not read native Crate Pro project files or evaluate spreadsheet formulas.

02

Confirm the profile and source units

For this exact fixture, SawNest shows “This matches the Crate Pro Pieces Report.” Choose “Confirm Crate Pro profile,” then select “Millimeters” under Source units. Profile matching checks the column layout and row values; it does not establish units or stock.

If your file does not match, use the advanced header and mapping controls. Do not force the profile or delete instructions just to obtain a match. The supported profile is intentionally narrow, including no active undercut adjustments and no second Notes value. Review any unmapped fields and resolve machining instructions separately.

The profile maps Piece to the part identifier, Component to its description, ItemID to material, Category to part type, Long to length, Wide to width, Thick to thickness, Details to operation notes and OmitFromCutSheet to exclusion. QtyDes is reference information; QtyTot is the total imported count.

03

Check totals before importing

This sample represents a design quantity of 2. QtyTot already includes that quantity and is used once. Do not multiply it by QtyDes again. The expected preview is 3 cutting rows, 12 pieces and 2 material groups: 6 plywood pieces and 6 lumber pieces.

The Fastener row has QtyTot 20 and OmitFromCutSheet 1. It stays outside cutting and is retained in the materials list and source record. No pack-size or purchasing rounding is applied. Duplicate source rows both count, so remove accidental duplicates in the original file.

Synthetic example: millimeters; total quantity already includes both designs
PieceCategoryThicknessWidthLengthQtyQtyDesQtyTot
P-01Plywood18280600224
P-02Plywood18280400122
B-01Lumber1938450326
H-01Fastener---10220
04

Import reviewed groups without losing existing work

Inspect the part preview, materials list and full row record, then choose “Import reviewed groups.” If a workspace is already open, explicitly choose whether to add these groups or replace it. Cancel preview keeps the existing workspace; Undo import restores it after an import.

Trying the general sample button at the top of the importer is a separate, smaller example with 9 cutting pieces. For the 12-piece totals in this walkthrough, use the Crate Pro CSV linked above.

05

Confirm stock and inspect each layout

Each imported group initially needs stock confirmation. Enter your measured sheet dimensions or usable board length, blade kerf, edge trim where applicable, and grain and rotation settings. Check the material and thickness against the stock. Source width and length are not proof of grain direction.

Build each group’s plan and compare requested, placed and unplaced counts before exporting. Hardware, rips, bevels, joinery and assembly instructions require a separate shop plan. This importer plans one stock size at a time with unlimited matching stock assumed; it does not calculate available inventory or a machine cutting sequence.

Your report is read in your browser. Choose Save workspace locally if you want to keep the reviewed workspace on that device, and retain your original report. Browser storage is not a synced backup. Read the optimizer methodology and privacy policy for the limits.

Apply it to your dimensions

Review your report before planning cuts.

Open the cut-list importer →